VF-30 Vacuum Furnace

• 6’ x 5’ Footprint Fits Your Mfg. Cell

• Utilizes Quick, Clean Induction Heating

• Heats To 1900°F In Less Than 15 Minutes

• For Brazing & General Purpose Heating

• Enables Continuous Flow Manufacturing

Our VF-30 Vacuum Furnace is designed to heat parts of virtually any shape in a high temperature, high vacuum environment. Although the compact 6’ x 5’ footprint fits easily into your manufacturing cell, our vacuum furnace can reach temperatures as high as 2200°F. The chamber has a typical ultimate vacuum of 5x10-6 Torr with a leak rate of less than 3 microns per hour.

easy part loadingWith the VF-30’s quick, clean induction heating system, 1900°F can be reached in less than 15 minutes. Cool down to 1200°F from maximum temperature can be achieved in 4.5 minutes.

The standard hot zone of the VF-30 has a 12” ID, 12” height and volume of 0.66 cu. ft. The chamber is mounted on a heavy duty stainless steel frame that houses all the required equipment for vacuum, atmospheric and system control, as well as the induction heating station.

The VF-30’s efficient induction heating system provides economical operation. The typical operating cost is just $2.69 per hour, based on $0.15/kwh and $0.40/ft3 Ar.

To maximize operator safety, the heating system is fully isolated. Safety interlocks protect access to the vacuum system chamber and manual controls. Other operator safety features include a light curtain, emergency stop and other warning systems built into the software and hardware.

VF-30 Data SheetVF-30 Video

VF-30 Vacuum Furnace (click to enlarge)
GH IA logo

Innovative Induction Heating

induction heating solutions